19 Aug

This week I conducted test of sticking 3D printed gondola to the envelope which is the mylar balloon. The material of the gondola is PLA and the material of the balloon is mylar. The test assumes that the interacting surface of gondola is plane, however, the surface on the balloon is not always...

18 Aug

For testing this week, I used the Air Swimmer blimp and made different modifications to it. My end goal was to determine whether propellers or using a flapping motion was a more effective way of providing thrust for our balloon. First, I did some basic flight tests to see how well it moved around...

17 Aug

The past few days, I have worked on implementing a pre-built flapping technology on helium balloons of different shapes and sizes running tests with them. Although the experiment did not go as planned (for reasons I will discuss later), I will discuss what did occur as I ran my first iteration of th...

17 Aug

Finished the experiment of using bluetooth and wifi to remotely control two motors. Bluetooth + cellphone app: Wifi + cellphone app:

13 Aug

Wenzhong and I have been working on the paper named Computational Design and Fabrication of Corrugated Mechanisms from Behavioral Specifications during the past week. We have submitted the paper and fingers crossed. Special thanks to Wenzhong for his suggestions and helps. Also thanks everyone...

12 Aug

Experience: learned about how to debug a logical error in coding with a scientific methodology, which could be a quite valuable lesson for future debugging. 1. Bug come up The logic bug (in this example) appears when the frontend of Unity tried to parse a stl file from backend compiler, transfo...

06 Aug

There are several existing visual-inertial SLAM implementations. Among all, I pick okvis as our development basis. However, the okvis project is too well-written with sophisticated implementation. There are also some building problem. In summary, it is pretty hard for us to develop, especially fro...

06 Aug

Robot Car And Paper Preparation This week, I built two fully functional wheeled robot cars as a tool to demonstrate the functionality of the corrugated structure. Figures Introduction Wheeled robot car Demo Videos Robot car with flat-plane wheels Robot car with corrugated wheels R...

05 Aug

Objective: Find a way to map 3D gesture geometry to 3D object geometry Find a set of parameter to represent 3D geometry for the mapping The reason to use parameters to represent, pass and map 3D geometries: The number of parameters is limited (compare to i.e. vertex number, mesh number, et...

05 Aug

Sampling-based motion planning approaches, such as Probabilistic RoadMap Method (PRM) and Rapidly-exploring Random Trees (RRT) , avoid the discretization problems of graph-based algorithms by randomly sampling the continuous domain. This scales more effectively to high-dimensional problems, but make...